Things I have learnt |
Post Reply |
Author | |
horrorhead
LureLovers.com Fanatic LureLover of the Year 2020 Joined: 14 Jun 2011 Location: Cooktown qld Status: Offline Points: 14008 |
Post Options
Thanks(1)
Posted: 10 Jan 2022 at 8:48am |
I'm starting this new thread to pass on things that I have learnt over time and would really appreciate input from others.
I'll start with a few- 1/ Fluorocarbon has very little benefit over monofilament leader material in terms of invisibility. If you "You Tube" this you will see it only offers a minute extra benefit. (I like the Schneider leader material, failing that just normal mono). 2/ Many leader materials are very slippery and even very well tied knots can pull out. A dab of Super Glue on the knots help to stop his. The softer materials hold better as the knot forms into itself better. 3/ Some timber lure makers do not seal their blanks. When the paint is broken / worn through/ bitten through, water is absorbed by the timber and can ruin the action. I have such a lure and it had swollen up so much that the rest of the paint has cracked through the expansion of the timber and lets even more water in totally deforming the lure. Even when timber lures are sealed, the sealing agent usually does not penetrate more then a few millimetres so deep wounds can let water in. Super Glue over these will help to reduce water absorbtion. 4/ Lures are not necessarily species specific. I've caught GTs on jointed murray cod lures, barra on murray cod lures, murray cod on barra lures - experiment. 5/ Many lures work well for the species they are made to target. But as in the above point you may need to make small alterations. Changing hook sizes is a good way to adapt a lure. A KAuttafurra yellowbelly lure was turned into an awesome coral trout lure because I put on much heavier hooks to stabilize it with the very fast rip wind action I use over the shallow reefs. As the lure was it had a great action for yellowbelly, bass and even barra. I also often use a wire leader to alter the characteristics of a surface lure - dig the nose down that little bit more - usually very helpful in rougher water. Let's hear other people's hints. You just may help me solve an issue I'm dealing with.
|
|
Martin-
you don't havta be pretty to fish |
|
Tony Mc
Senior Member Joined: 21 Jun 2013 Location: Brisbane Status: Offline Points: 771 |
Post Options
Thanks(1)
|
Something I learned from a squid fisherman:
Solder (used for stained glass) added to hooks or hangers will change the buoyancy/sink rate of a lure. This way you can use a thin gauged hook for penetration and still increase the rate your lure sinks or the length of cast. |
|
a good lure is a tool, not a toy - Vic McCristal
|
|
bassnbob
Stall Holder B.O.B Timber Lures Joined: 22 Nov 2009 Location: Charlestown Status: Offline Points: 9390 |
Post Options
Thanks(0)
|
Slow sinking lures work very well on oz bass etc around morred yahts etcmore time in the strike zones
|
|
senkosam
Senior Member Joined: 26 Apr 2013 Location: Walden, NY Status: Offline Points: 132 |
Post Options
Thanks(0)
|
Fluorocarbon has very little benefit over monofilament leader material in terms of invisibility
I've used braid since it first came out (Power Pro which I don't care for) and found many advantages over other line types. Knots never come out; good light-strike detection when using small lures cast over 40' away + zero stretch for good hook sets (so make sure the rod has enough flex and the reel a drag that's not to tight). Line diameter is thinner than another type: i.e. 10# test is 6# diameter. Good for not impeding lure action. Fish aren't affected by line visibility. Their attention is solely on the lure and will strike it if the lure is of the right size, action and going at the right speed(s). Line diameter that's too thick will affect lure action - especially smaller subsurface lures that need a bit of finesse. Lures are not necessarily species-specific. No lure is - especially soft plastics and many hard lures. On any one day I can catch 4 species on the same lure and in a range of fish sizes from 3" fish to 7# catfish. I doubt salt water is different. If a lure has the right action and of the right size, many species will strike it as i've illustrated with post pictures. Lure size on the other hand may exclude smaller fish if it exceeds a certain size as well as the larger hooks needed for larger fish. JMO |
|
p.j.
Stall Holder P.J's Lures Joined: 06 Jan 2011 Location: Denmark Status: Online Points: 2936 |
Post Options
Thanks(0)
|
Know many off you use different leaders. This not is inventet by a Dane E G Michelsen and is very strong
Maybe some off you can use it Knaek & Break Per |
|
P.J. LURES
SO SMOKING HOT EVEN CUSTOM DOGS LIKE THEM |
|
spooonminnow
Unverified New Member Joined: 15 Feb 2022 Location: NY Status: Offline Points: 9 |
Post Options
Thanks(0)
|
That's a uni-knot if I'm not mistaken and the only knot I use for line-to-lure and the double-uni leader-to-line. The knot never comes loose!
|
|
horrorhead
LureLovers.com Fanatic LureLover of the Year 2020 Joined: 14 Jun 2011 Location: Cooktown qld Status: Offline Points: 14008 |
Post Options
Thanks(0)
|
A selection of colours in nail polish is great for touching up lures or adapting the colour of a lure to the local bait.
Always check the line roller on your thread line reel works freely. Failure to do this can cause a huge amount of friction over time leading to line weakness. At the worst, a hit from a big fish can snap the line at the roller. Carry a couple of spare trebles and split rings with you. If a treble becomes too weak just change it. Check your rod's guides regularly for cracks or breakages as his can damage your line leading to unexplained line failure. Passing cotton wool through the guide will tell if your guide is cactus because strands of it will get caught in he cracks. When netting or gaffing a fish lift the net / gaff vertically. I've had a net and a gaff broken in the last 2 years by others trying to lift them horizontally.
|
|
Martin-
you don't havta be pretty to fish |
|
Nativeman
LureLovers.com Fanatic Joined: 02 Jun 2010 Location: The Switch Status: Offline Points: 1447 |
Post Options
Thanks(0)
|
When mixing Envirotex Lite, use a metal paddle to stir, doesn't create air bubbles in the mix.
Lure colours that consistently work for me, Purple, Green, white and black.
|
|
puglee62
Stall Holder Fugly Lures Joined: 03 Feb 2010 Location: ipswich Status: Offline Points: 7933 |
Post Options
Thanks(0)
|
1/ Fluorocarbon has very little benefit over monofilament leader material in terms of invisibility. the very light ones may have Martin.we changed out our 4lb monofilament flyline tippets for 4lb berkley vanish and noticeably increased our catch rate with trout.
|
|
that's no how ye make porridge!
|
|
puglee62
Stall Holder Fugly Lures Joined: 03 Feb 2010 Location: ipswich Status: Offline Points: 7933 |
Post Options
Thanks(0)
|
Even when timber lures are sealed, the sealing agent usually does not penetrate more then a few millimetres so deep wounds can let water in,
yep,the only way to get sealer to penetrate to a decent depth is to put the lure blank in a pot of epoxy resin in a pressure pot and apply air pressure.This causes the timber to suck up the epoxy.Most luremakers would'nt do this as its already a lot of work to make a lure(which is for all intents and purposes just terminal tackle just like a hook or sinker)Mind you the price of some lures is so high that they should be almost indestructible!
|
|
that's no how ye make porridge!
|
|
horrorhead
LureLovers.com Fanatic LureLover of the Year 2020 Joined: 14 Jun 2011 Location: Cooktown qld Status: Offline Points: 14008 |
Post Options
Thanks(0)
|
This mostly depends upon what timber is used as to the extent of water absorption. But sealed timber lures also create a “ shell” that doesn’t absorb water and helps to keep the shape from any water absorption.
Freshwater trout are known for their great eyes it and very cautious nature, with any similar fish then you want all of the advantages you can get your hands on. For most of our species, fluorocarbon doesn’t make a difference.
|
|
Martin-
you don't havta be pretty to fish |
|
puglee62
Stall Holder Fugly Lures Joined: 03 Feb 2010 Location: ipswich Status: Offline Points: 7933 |
Post Options
Thanks(0)
|
|
|
that's no how ye make porridge!
|
|
Screamingreel
LureLovers.com Fanatic Joined: 19 Oct 2010 Location: Adaminaby, NSW Status: Offline Points: 6127 |
Post Options
Thanks(1)
|
Interesting Thread Martin
I have been tying a 6 wrap surgeon knot 8lb fluo to 08mm or 09mm braid without one failure to date
most recently landed 59 and 60cm brown on three gram lures casting into and or side on to very strong winds, winding slowly. 8ft 6inch rod 1 to 3 kg You do need a little practise for everything to work and get maximum distance. Regards John |
|
puglee62
Stall Holder Fugly Lures Joined: 03 Feb 2010 Location: ipswich Status: Offline Points: 7933 |
Post Options
Thanks(0)
|
good to see your still getting the big ones John,surgeons knot sounds good
|
|
that's no how ye make porridge!
|
|
horrorhead
LureLovers.com Fanatic LureLover of the Year 2020 Joined: 14 Jun 2011 Location: Cooktown qld Status: Offline Points: 14008 |
Post Options
Thanks(0)
|
Hope to get down your way next year John
|
|
Martin-
you don't havta be pretty to fish |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |